Server Technology C1W24VT-5PPA17AC/C

PRO1

Server Technology PRO1 Primary PDU

PDU

Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.

PRO1 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card.

Web, SSH, Telnet, SNMPv2c & v3, RS-232 serial, 10/100 Base T-Ethernet, LDAP(S), TACACS+, RADIUS, DHCP, & SMTP/email.

PIPS (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet.

On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles.

This product has been tested and approved for safe and reliable operation in 60 C data center environments.

Select from six colors to designate PDU circuits in the data center black, white, red, green, blue, and yellow.

Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit.

Supports two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.

Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high density cabinets.

This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic hydraulic circuit breakers or UL 248 fuses.

PRO1 receptacles have high retention and are compatible with P-Lock type power cords.

Includes standard button mounts along with provisions for custom mounting brackets.

415

50/60 Hz

240/415V Wye 30A IEC 60309 3P+N+G 6Hr

30

24

17.3

3-Phase Wye (L-N)

Bottom/End

Conventional

Rating

North American Rating: 12A @240V L-N(15A Peak)

Sense

5 kAIC

Circuit Breaker: 1-pole

No

Yes

Auto-Orient

Yes

No

0U Vertical

None

UL 489, CSA C22.2 No. 5 & IEC/EN60947-2 Compliant 1-pole, 20A trip circuit breakers, six (6) branch, rating: 16A, 5 kAIC Interrupt Rating

Dimensions: 69.0in tall x 1.75in wide x 3.5in deep [1753mm x 45mm x 89mm]

Operating Environment: 32F to 140F / 0C to 60C

10/100 Mbps Ethernet (RJ-45 connector), RS-232 serial (RJ-45 connector)
Two (2) temperature/humidity sensor inputs (4P4C), Link port (RJ-12) - {also on Link PDU}
Web-browser GUI and command-line interface (CLI): HTTP/HTTPS, TLSv1.2, SSHv2, Telnet, SNMPv2c and v3 (GET, SET, Traps), IPv4 and IPv6, LDAPv3/LDAPS, TACACS+, RADIUS, FTP/SFTP

North American:
Safety (Listed & Certified, cTUVus mark)
UL 62368-1
CSA C22.2 No. 62368-1
EMC
FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A
CANICES-003, Class A

Input Measurement Accuracy:
LED Current = 10% at 0.1 amp (0.3 - 9.9 amps) and 1 amp (> 9.9 amps) resolution
GUI Current = 1% at 0.01 amp resolution (above 0.25 amp)
Voltage = 1% at 0.1 volt resolution (nominal 10%)
Active Power = 1% at 1 watt resolution
Apparent Power = 1% at 1 volt-amp resolution
Power Factor = 3% at 0.01 resolution
Crest Factor = 10% at 0.1 resolution
Energy = 1% at 0.1 kilowatt-hour resolution

Manufacturer Warranty. For defective returns, Tech For Less will give you a full refund and will arrange for and pay all shipping costs.