Tech for Less - Name Brand Computers & Electronics...Same Technology, Lower Prices

Contact Us

1610 Garden of the Gods Rd.
Colorado Springs, CO 80907

Sales: 1.866.880.1230

Operating Hours

Monday — Friday
Outlet Store:
9:00am to 4:00pm MT
Phone Inquiries:
9:00am to 4:00pm MT
MakerBot True White ABS Plastic 1kg Spool - 1.75mm / 1.8mm - True White
Factory Sealed 1 Left
• Brand new
• Original manufacturer packaging
• Full manufacturer warranty

Now only: $41.97
MakerBot ABS Filament is the best, most consistent, and most tested ABS filamentfor MakerBot® Replicator® 2X Experimental 3D Printers.

MakerBot ABS Filament is good for detailed prints and can be used in conjunctionwith MakerBot® Dissolvable Filament. The dissolvable filament acts as solid infillmaterial.

Each filament color is comprehensively quality tested at both 100 micron and 200-micron layer resolutions on the MakerBot Replicator 2X to verify it will perform everyfeature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model.

Every filament color undergoes long duration testing to ensure that there are no
deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing.

Consistently round diameter - ensures highest print quality and consistent flow
through the extruder nozzle.

MakerBot ABS Filament adheres well to kapton tape on heated build plate. MakerBot ABS Filament requires a heated build platform. Also, ensure your build plate is level, clean and oil-free. Use MakerBot ABS Filament in a well-ventilated area.

Compatibility: MakerBot 3D Printers:

General
Model Number

MP01970

Product Name

MakerBot MP01970 3D Printer ABS Filament

Packing

Spool

Product Type

3D Printer ABS Filament

Print Color

True White

Physical Characteristics
Weight (Approximate)

2.20 lb

Miscellaneous
Additional Information

  • Spool Diameter: 8 in
  • Spool Width: 3 in
  • Spool Hub Hole: 2 in
  • Diameter: 1.75 mm

  • Temperatures:
  • Glass Temp: 105°C (221°F)
  • Melting Temp: 1Amorphous, no "true" melting point
  • Nozzle Temp: 230°C (446°F)
Compatibility

MakerBot 3D Printers:

  • Replicator 1
  • Replicator 2X
  • Thing-O-Matic Stepstruder MK6+ and Up
Warranty
Warranty:

Manufacturer Warranty. For defective returns, Tech For Less will give you a full refund and will arrange for and pay all shipping costs.